Using The Safety Instructions; Safety Instructions - Structure; Explaining Signal Words And Safety Alert Symbols - Bosch rexroth NYCe 4000 Instructions Manual

6/45

Using the Safety Instructions

or
NYS04.2-ST-03-ULNN-NY4033 system housing, material number R911172966
or
NYS04.2-ST-04-ULNN-NY4043 system housing, material number R911172906
or
NYS04.2-ST-05-ULNN-NY4053 system housing, material number R911172907
DOK-NY4000-SYST*40X3**-IT09-EN-P
●
R911337318.
Cable connector parts for 24V System, SE, Drive Power and Motor
●
connections.
3 Using the Safety Instructions

3.1 Safety instructions - structure

The safety instructions are structured as shown in the following example.
Fig. 3-1: Safety instruction lay-out

3.2 Explaining signal words and safety alert symbols

The safety instructions in this documentation contain specific signal words
(danger, warning, caution, notice) and if necessary, a safety alert symbol
(according to ANSI Z535.6-2011).
The signal word is meant to draw the reader's attention to the safety instruction
and signifies the degree of danger. The safety alert symbol (a triangle with an
exclamation point), which precedes the signal words "danger", "warning" and
"caution" is used to alert the reader to personal injury hazards.
DANGER
Bosch Rexroth AG R911337318_Edition 09
NYCe 4000 Multi-axis motion control
Instructions,
In case of non-compliance with this safety
instruction, death or serious injury will occur.
system
material number