Everpure EV4339-23 Tips

Filter head with 3/8" QC Fittings exclusively for Claris
replacement cartridges
I N S T A L L A T I O N T I P S
The system can be operated freestanding, lying
horizontally or mounted vertically
If mounting vertically to a wall, securely connect
the mounting bracket to the wall using suitable
screws
Water pressure at the filter system inlet must
not exceed 116 psi (8 bar). A pressure reducer
valve must be installed on the water supply side
of the filter system if the inlet pressure exceeds
116 psi (8 bar)
Shut off valve must be installed upstream of
the filter
Refer to Installation, Operation & Maintenance
Manual for cartridge flushing and RO start-up
EV4339-23
C l ar i s S i ng l e H e ad
QL3 Single Head: EV9259-14
Claris Single Head: EV4339-23
O P E R A T I O N T I P S
Change Claris cartridge when its pre-calculated water
volume has been reached or at least once a year
Change cartridges when capacity is reached
Always flush the filter cartridge at time of
installation and cartridge change
Do not use hardness test strips to check for
hardness reduction, please use Titration kit to
check for hardness reduction
B E N E F I T S
Commercial quality filter head is designed
exclusively to fit Claris filter cartridges
Solid durable construction is ideal for foodservice
and vending applications
Engineered for durability, strength and longevity
Will not corrode
HEAD FEATURES
Built-in flush port

Auto shut-off

Adjustable by-pass

A P P L I C A T I O N / S I Z I N G
The CLARIS filter systems are typically used to
feed the following appliances:
-Coffee and Espresso Machines
-Hot drink vending machines
-Combi steamers and self-cooking systems
-Steam cookers and ovens
-Brewed Iced Tea
The systems can be operated horizontally or
vertically, depending on the space available