Everpure SC10-11 Specification Sheet

Total Water Treatment System for Steam Applications
I N S T A L L A T I O N T I P S
Choose a mounting location suitable to support
the full weight of the system when operating
Use minimum 1/2" O.D. Tubing, or equivalent,
from the outlet of the filtration unit to the
steamer/combi-oven
Use the water form the SC Series unit only on
steamer/combi-oven feed and make-up water.
Do not use to treat condensate cooling water
Install vertically with cartridges hanging down
Prior to connecting the SC series system outlet to
the steamer, run water through the unit and water
lines to purge air, particles and debris.
EV9797-82
S C10- 11 St e am Fi lt r at i on Sy st e m
SC10-11 System: EV9797-82
SC10-11 System: EV9797-82
CG5-10 Carbon Block Cartridge: DEV9108-15 CG5-10 Carbon Block Cartridge: DEV9108-15
SS-10 Scalestick Cartridge: EV9799-02 SS-10 Scalestick Cartridge: EV9799-02
O P E R A T I O N T I P S
Replace CG5-10 Carbon Block cartridge
whenever its capacity is reached (6,000 gal.) or
when it becomes excessively dirty (observed
visually or by flow restriction)
Change SS-10 Scalestick Cartridge before
HydroblendTM Compound is completely used
up
Always flush filter cartridge at time of installation
and cartridge change
B E N E F I T S
Total system delivering high quality filtered water
with scale inhibition capabilities
Improves performance, maximizes energy
efficiency and increases the life of steam
equipment
Reduces chlorine-induced corrosion
Drop-in style filter bowl housings
5-micron block cartridge for particulate and
chlorine reduction
Long lasting SS-10 cartridge for scale control
Outlet pressure gauge pre-assembled onto header
assembly
A P P L I C A T I O N / S I Z I N G
For commercial steam applications
For use with foodservice steamer and combi-oven
applications