Advertisement
Quick Links
E-Series prefilters are designed to increase the life of Everpure carbon water filters in
areas with an unusual amount of dirt in the water. With a 10 micron (nominal) rating,
the Everpure prefilter traps much of the dirt which contributes to scale buildup in ice
makers, and clogs the delicate orifices of other water-using equipment.
Parts List
Description
Head
O-Ring (E-Series)
EC110 Coarse Prefilter Cartridge 40 pk.
EC110 Coarse Prefilter Cartridge 12 pk.
EC210 Coarse Prefilter Cartridge 20 pk.
EC210 Coarse Prefilter Cartridge 6 pk.
10" Bowl, clear
20" Bowl, clear
10" Bowl, opaque
20" Bowl, opaque
Reducer Bushing for inlet and outlet ports
3/4" NPT x 3/8" FPT (E10)
Reducer Bushing for inlet and outlet ports
3/4" NPT x 1/2" FPT (E20)
Filter wrench
*The Standard EC110 Cartridge is provided with each Model E10 Filter. It is rated at 10
microns nominally and has a more-than-adequate life when filtering water with "normal" or
average dirt loads. The EC210 cartridge is provided with each E20 filter, which is also rated
at 10 microns nominally.
Applications and Features
• General purpose coarse filtration
• Pre-filtration for fine filters
• Reduces dirt, rust, oxidized iron and sulfide
• High-strength materials
Installation
The E10 coarse prefilter (part number EV9795-80) includes two 3/8" FPT optional reducer bushings. The E20 course pre-
filter (part number EV9795-90) includes two 1/2" FPT optional reducer bushings. Before starting the installation, be sure
to shut off both power and water to the equipment being served by your E-Series prefilter. For servicing purposes, a man-
ual shut-off valve should be installed in the water line.
IMPORTANT:
Always use a NSF approved pipe dope or Teflon tape at all thread connections.
1.
Select a suitable location for mounting the prefilter and install mounting screws 2 1/4" apart. The prefilter should be
close to the machine served and mounted ahead of the carbon filters for optimum performance.
2.
Remove the prefilter from the carton and separate the bowl and head assembly. Set the bowl and cartridge aside. If
installing the EV9795-80 coarse filter, assemble (2) 3/8" FPT x 3/4" MPT bushings to the head (as needed). If
installing the EV9795-90 coarse filter, assemble (2) 3/4" MPT x 1/2" FPT bushings to the head (as needed). Be sure
to use a NSF approved pipe dope or teflon tape.
3.
Check to be sure the o-ring on the bowl is sufficiently lubricated. If additional lubrication is needed, use only a high
quality food grade silicone lubricant.
Installation and Operation Guide
E10 & E20 Prefilter Systems
Part No.
EV3112-37
EV3112-40
EV9534-40
EV9534-12
EV9534-20
EV9534-26
EV3112-39
EV3112-38
EV3112-56
EV3112-55
EV3105-91
EV3098-23
EV3112-41
E10 Prefilter
EV9795-80
E20 Prefilter
EV9795-90
Advertisement
Related Manuals for Everpure E10 Series
Summary of Contents for Everpure E10 Series
-
Page 1: Parts List
With a 10 micron (nominal) rating, the Everpure prefilter traps much of the dirt which contributes to scale buildup in ice makers, and clogs the delicate orifices of other water-using equipment. -
Page 2: Filter Specifications
1/2” minimum piping on EV9795-90). Connect outlet side to the next piece of equipment used. If installing the E-Series prefilter for use with standard Everpure Quick Change filters, shut off the water supply to the carbon filters by rotating the valve handles on the heads, to approximately the 9 o'clock position. If the E- Series prefilter is being installed to provide protection to an Everpure High Flow CSR water treatment system, shut off main water supply, install the prefilter in front of the ball valve and an additional ball valve in front of the prefilter. - Page 3 Everpure. If a part described above is found defective within the specified period, you should notify Everpure technical service at the phone number listed below. Any part found defective within the terms of this warranty will be repaired or replaced (at Everpure’s dis- cretion) by your local dealer or Everpure technical service.
- Page 4 This page contains materials and DCO information. IT DOES NOT PRINT AS PART OF THE DOCUMENT! VENDOR MUST SUBMIT A MATERIAL CERTIFICATE OF COMPLIANCE WITH EACH SHIPMENT. Materials & Description: E10 & E20 Prefilter Installation and Operations Guide EV311448 Size: 11”...