Table of Contents
Advertisement
Setting value
02
ONLY FIXED TARE
16 – DISPLAY BACKLIGHT
Setting value
01
NO TURNING OFF
02^ TURN OFF (15 SEC)
03
TURN OFF (30 SEC)
17 – POWER SAVING MODE
Setting value
01
SWITCHED OFF
02
TURN ON (10 MIN)
03^ TURN ON (30 MIN)
04
TURN ON (60 MIN)
18 – SCALES SYSTEM
This setting allows you to specify the number of the scale while it is working in the scale system.
The number can be entered by using the
There is possible to enter the values in the range from 1 to 4. The default value is 1. Each of scales
working in the system should have different scale number entered.
19 – DISPLAY CONTRAST ADJUSTMENT
Setting value
01
ADJ. MAIN DISPLAY
02
ADJ. ADDIT. DISPLAY
20 – RESTORE FACTORY SETTINGS
This setting allows to restore factory settings marked with „
be confirmed by pressing the
21 – PROGRAM VERSION
The function enables to read the main program version of the scale and the display program version.
Main program version No.
MEASURER: v.1.00
0.00
0.00
ELZAB S.A.
Single pressing of the
After removing the loading the tare isn't automatically
switched off.
The display backlight remains switched on.
The display backlight is switched off after 15 or 30 sec.
of the scale inactivity.
Power saving mode is inactive.
Power saving mode will be activated after 10, 30 or 60
minutes of the scale inactivity.
The function enables to adjust the contrast of the main display.
The function is inactive in the TFT colorful displays.
The function enables to adjust the contrast of the additional
display. The function is inactive in the TFT colorful displays.
key.
0.000
Meaning
key switches on the "fixed tare".
Meaning
Meaning
key and confirmed by pressing the
Meaning
" sign. The selected settings should
^
Display program version No.
DISPLAY: v.2.22G
0.00
0.000
0.00
User Manual CAT 27 scales series
key.
19
Advertisement
Table of Contents
