Table of Contents
Advertisement
17.
Fit front top panel plastic hin-
ge covers on the opposite si-
des. (16)
18.
Remove the handle cover
gently taking care not to dama-
ge the appliance.(17)
19.
Unscrew and remove the hand-
le (18). Do not unscrew the yel-
low coloured screws!
20.
Rotate 180 degrees and fit
handle to the other side af-
ter removing hole plugs gently.
(19,20)
21.
Fit the handle cover.(21)
22.
Adjust the two front feet if ne-
cessary.
23.
Check that door opens and clo-
ses easily, it is aligned correctly
and there are no gaps allowing
air into the cabinet. If there are
gaps between the door seal
and the cabinet, adjust the door
seal by gently pulling away
from the door using fingers.
24.
Check that all the hinge screws
are tightened. Avoid over tigh-
tening the screws.
25.
Put all items, fittings back in
the appliance.
26.
Wait for at least 4 hours to al-
low the system to settle before
switching on.
27.
Once the correct storage tem-
peratures have been reached in
the appliance, put back all the
food.
12
Advertisement
Table of Contents
