Download Print this page
Whalen Furniture Abington SPUS-ABTD Instruction Booklet

Whalen Furniture Abington SPUS-ABTD Instruction Booklet

2 tone desk

Advertisement

Quick Links

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP
POINTS, SHARP EDGES AS RECEIVED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
Or visit our web site 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
Abington 2 Tone Desk
Model # SPUS-ABTD
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
www.whalenfurniture.com
Or e-mail your request to parts@whalenfurniture.com
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2018-09-18
1-866-942-5362
LOT NUMBER:
DATE PURCHASED: /
Rev. 0001-A
/

Advertisement

loading
Need help?

Need help?

Do you have a question about the Abington SPUS-ABTD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Whalen Furniture Abington SPUS-ABTD

  • Page 1 LOT NUMBER: DATE PURCHASED: / Abington 2 Tone Desk Model # SPUS-ABTD ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
  • Page 2: Special Note

    M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Abington 2 Tone Desk MODEL #: SPUS-ABTD MADE IN CHINA MAXIMUM LOAD 200 lb (90.8 kg)
  • Page 3 IMPORTANT Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non- abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual. NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF WITH DAMP CLOTH.
  • Page 4 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Desk Top (Qty. 1) B- Left Side Panel (Qty. 1) C- Left Partition Panel (Qty. 1) D- Right Partition Panel (Qty.
  • Page 5 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. Q1- File Drawer Front (Qty. 1) Q2- File Drawer Left Side (Qty. 1) Q3- File Drawer Right Side (Qty. 1) Q4- File Drawer Back Panel Q5- File Drawer Bottom Panel R- Guide Rail...
  • Page 6 Middle Drawer Assembling 1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a carpeted floor or the empty carton to avoid any scratch. 2. Fasten the Middle Drawer Back Panel (P5) between the Middle Drawer Side Panels (P3 and P4) with two 32 mm Screws (7).
  • Page 7 Middle Drawer Assembling 4. Turn the assembled drawer upright. Extend the Drawer Front Hinges Arms (16) and rest the hinge cups onto the cutouts of the Middle Drawer Bottom Panel (P2). Attach the Hinges (16) to the Middle Drawer Front (P1) and the Middle Drawer Bottom Panel (P2) with four 15 mm Zinc Screws (14) in each. 5.
  • Page 8 Drawer Assembling 7. Attach one Handle (11) to the outside of Middle Drawer Front (P1) with the provided Handle Bolt (12). 8. Securely screw four Cam Bolts (3) into the designated small holes on the Drawer Front (Q1). File 9. Attach the Middle Drawer Left and Right Sides (Q2 and Q3) to the Middle Drawer Front (Q1) with four Small Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement).
  • Page 9 File Drawer Assembling 10. Slide the Drawer Bottom Panel (Q5) all the way into the grooves with finished surface up. File 11. Fasten the Drawer Back Panel (Q4) to the Drawer Side Panels (Q2 and Q3) with four 32 mm File Screws (7).
  • Page 10 File Drawer Assembling 12. Pick up 16" Ball Bearing Slides (T) and separate the Slide Runners for later step. Extend the Slide Runner all the way forward. Press the plastic release lever of the ball bearing slides up and pull the Slide Runner complete out.
  • Page 11 Assembly Instructions Q2/Q3 15. Position Guide Rails (R) onto the Drawer Left and Right Sides (Q2 and Q3) with the high side facing inward. 16. Hook two File Hangers (S) onto the high edge of Guide Rails (R). Slide the File Hangers forward and backward to keep hanging files organized.
  • Page 12 Assembly Instructions 18. Using the pilot holes as a guide, attach separated 14" Slide Tracks (U) to the Slider Supports (K) respectively with three 1/2” Screws (9) per slide track. 19. Using the pilot holes as a guide, attach separated 16" Slide Tracks (T) to the Panels (D and E) respectively with three 1/2”...
  • Page 13 Assembly Instructions 20. Securely screw the Cam Bolts (3) into the designated small holes on the Panels (A, B and E). 21. Attach the Top Stretchers (I and J) to the Desk Top (C) with six M8 x 30 mm Wood Dowels (4) and seven 25 mm Screws (6).
  • Page 14 Assembly Instructions 22. Securely screw the Cam Bolts (3) into the designated small holes on the Left Partition Panel (C) at both sides. 23. Securely screw the Cam Bolts (3) into the designated small holes on the Right Partition Panel (D) at both sides.
  • Page 15 Assembly Instructions 24. Attach one Side Back Panel (G) to the Left Side Panel (B) with two M8 x 30 mm Wood Dowels (4) and three Large Cam Locks (2). 25. Using the pilot holes as a guide, attach the Door Stopper (17) to the bottom of Fixed Shelf (F) with two M3.5 x 12 mm Screws (9).
  • Page 16 Assembly Instructions 26. Attach the Fixed Shelves (F) to the Left Side Panel (B) with two M8 x 30 mm Wood Dowels (4) and two Large Cam Locks (2) in each.
  • Page 17 Assembly Instructions 27. Repeat the same procedure to attach the Left Partition Panel (C) at the opposite end. 28. Attach the other Side Back Panel (G) to the Right Side Panel (E) with two M8 x 30 mm Wood Dowels (4) and three Large Cam Locks (2).
  • Page 18 Assembly Instructions 29. Attach the Fixed Shelf (F) to the Right Side Panel (E) with two M8 x 30 mm Wood Dowels (4) and two Large Cam Locks (2). 30. Fasten the Side Stretcher (M) to the Right Side Panel (E) with one M8 x 30 mm Wood Dowel (4) and one Large Cam Lock (2).
  • Page 19 Assembly Instructions 32. Attach the Middle Back Panel (H) to the Right Partition Panel (D) with two M8 x 30 mm Wood Dowels (4) and two Large Cam Locks (2). 33. Fasten the Middle Stretcher (L) to the Right Partition Panel (D) with one M8 x 30 mm Wood Dowel (4) and one Large Cam Lock (2).
  • Page 20 Assembly Instructions 36. Extend the Hinges Arms (13) and rest the Hinge Cups onto the cutouts of the Door (O). Secure the Hinge Arms in place by using two 15 mm Zinc Screws (14) in each. 37. Attach one Handle (11) to the front side of Door (O) with the provided Handle Bolt (12). 38.
  • Page 21 Assembly Instructions 40. Insert the Shelf Pins (10) into the desired holes in the sides of the compartment. Make sure you place four Shelf Pins in the same level so the shelf is not tilted. Tilt and rest the Adjustable Shelf (N) onto the Shelf Pins (10).
  • Page 22 Assembly Instructions 42. Plug the Cam Lock Covers (15) onto the visible cams locks to conceal the cams.
  • Page 23: Care And Maintenance

    Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.