Table of Contents
Advertisement
1.2 The main functions
At start up, you have direct access to the 6 CAP2600 WORKSHOP™ functions:
Start
Used to draw up the dipped-beam headlamp report, to print a result ticket and to access the WEB
interface expert report.
Dipped beam
It is used to accurately adjust the dipped-beam headlamps: dip angle, lateral angle and light intensity
measurement.
High beam
It is used to adjust the high beam: dip angle, lateral angle and light intensity measurement.
Fog lamps
It is used to adjust the fog lamps: dip angle and light intensity measurement.
AFS calibration
It is used to calibrate the AFS function. A specific diagnosis tool is required to interact with the calculator.
Configuration
This menu gives access to several sub-menus used to configure the different CAP2600 WORKSHOP™
functions, such as the printer mode, the date and time etc.
Edit: 30/07/19 | Rev A | Page: 12
Advertisement
Table of Contents
