Electrical Connection - Toshiba MMK-UP0151HP-E Installation Manual

10

ELECTRICAL CONNECTION

1. Using the specified wires, ensure to
connect the wires, and fix wires securely so
that the external tension to the wires do not
affect the connecting part of the terminals.
Incomplete connection or fixation may cause a
fire, etc.
2. Be sure to connect earth wire.
(grounding work)
Incomplete grounding cause an electric shock.
Do not connect ground wires to gas pipes,
water pipes, lightning rods or ground wires for
telephone wires.
3. Appliance shall be installed in accordance
with national wiring regulations.
Capacity shortage of power circuit or
incomplete installation may cause an electric
shock or a fire.
For communication line, use wires with
•
the same type and size. lf each wire has a
different type and size from another one,
it will cause a communication trouble.
If incorrect/incomplete wiring is carried out,
•
it will cause an electrical fi re or smoke.
Install an earth leakage breaker that is not
•
tripped by shock waves. If an earth leakage
breaker is not installed, an electric shock may
be caused.
Use the cord clamps attached to the product.
•
Do not damage or scratch the conductive
•
core and inner insulator of power and system
interconnection wires when peeling them.
Use the power supply wire and control wires
•
of specifi ed thickness, type, and protective
devices required.
Do not connect 208–240V power to the
•
terminal blocks (Uv (U1)), (Uv (U2)), (A), (B)
for control wiring.
(Otherwise, the system will fail.)
Perform the electric wiring so that it does not
•
come to contact with the high-temperature
part of the pipe. The coating may melt
resulting in an accident.
21-EN
WARNING
CAUTION
REQUIREMENT
Local Regulation in each country.
follow the Installation Manual of each outdoor
unit.
come to contact with the high-temperature part
of the pipe.
The coating may melt resulting in an accident.
provide a trap and fix wires with the cord clamp.
line in the same line.
vacuuming of the refrigerant pipes completes.
21
Installation Manual