Msr Configuration - PIONEERPOS Asterix Touch-X5 Installation And Configuration Manual

MSR Configuration

In order to work with pcAmerica's software, all MSR's (magnetic swipe readers) need to read from track 2
only. When swiped into notepad a credit card should look like this (including the carriage return);
;1234567891234567=12345678912345678912?
If when swiped in notepad the swipe looks like this;
%B1234567891234567^TEST CARD^12345678912345678912?
;1234567891234567=12345678912345678912?
It is reading from tracks 1 and 2, and the MSR needs to be configured to work with our software.
Note: The Configuration for the MSR requires that a PS/2 keyboard be plugged into the port labeled
below (make sure the unit is OFF when connecting the PS/2 keyboard):
Note: For any configuration we will need to use the numbers above the characters on the keyboard ONLY!
9 | P a g e