Customer Display Configuration And Tests - PIONEERPOS Asterix Touch-X5 Installation And Configuration Manual

Customer Display Configuration and Tests

1. Connect the Customer Display to an available Serial
(COM) port on your computer, i.e. COM1.
2. After running the driver installation file this
application should open automatically, if it does
not then see below.
3. Select the Line Display(s)
4. Select the default Device Name (pposdisp).
5. Make sure that Device Type is selected as Aedex-
COM1 (as the display is connected to COM1).
6. Select the Test... button.
7. Select the Update Display button.
8. Pioneer POS Line Display will be scrolling across the
display.
9. Select Close to exit.
If the Application doesn't automatically start then
please do the following:

Select Start.

Select Programs.

Select PPOS OPOS.

Select PPOSConfig.
18 | P a g e