Operation Of Wall-Mounted Control - Mandik CP-M-B Manual

KJM MANDÍK Controlling with CPM Wall-Mounted Control
7

Operation of Wall-Mounted Control

The wall-mounted control allows:
 Switching on/off and controlling the fan speed.
 Correction of the desired temperature.
 Air-conditioning unit status indication.
A
D
Legend
Position
Switching The rotation knob for controlling the fan speed on the control (position C) has
on and two functions:
 Switching the air-conditioning unit on/off.
speed
control
 Controlling fan speed.
Position
OFF
MIN
MAX
MIN-MAX
NONO_CP-M-B_2019-6
Meaning
A Green LED for mode indication.
B Red LED for fault signalling.
C Rotary knob for switching on fans and setting their speed.
D Rotary knob for correcting the desired temperature.
Meaning
The air-conditioning unit is off. It switches on when the knob is at least
in the MIN position.
The air-conditioning unit starts on and the fans start to run at the
minimum speed. The minimum speed values are set separately for
each fan in the menu on the controller display Components

Inlet Attenuation and Components
Attenuation.
The fans are running at maximum speed. The maximum speed values
are set separately for each fan in the menu on the controller display
Components
 
Outlet Comfort.
The fan speed changes continuously according to the rotary knob
position from MIN to MAX.
  
Fans Inlet Comfort and Components
www.mandik.cz
B
C

Fans
 
Fans Outlet

Fans


7