KJM MANDÍK Controlling with CPM Wall-Mounted Control
4
Electrical Wiring
Connection
Terminal Descripti
of terminals
The CP-M-B series wall-mounted control can only be powered from a DC power
Note
supply. The power supply must meet the requirements given in chapter '2
Technical data'.
Terminal
side
NONO_CP-M-B_2019-6
Type
on
1
ERROR
Input
2
RUN
Input
3
FAN
Output
4
TEMP
Output
5
+24V
Power
supply
6
GND
Power
supply
Meaning
Power supply for fault signalling LED +24 V ss.
Power supply for run signalling LED +24 V ss.
Fan switching on and required speed 0-10 V
Desired temperature correction 0-10 V
Power supply +24 V ss.
Common ground
www.mandik.cz
5