• The disc is dirty or inserted upside down.
t Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play due to a problem.
t Insert another disc.
• Press Z (eject) to remove the disc.
FAILURE (Illuminates until any button is pressed.)
The connection of speakers/amplifiers is incorrect.
t See the installation/connections manual of this
model to check the connection.
FAILURE (Illuminates for about 1 second.) (CDX-
When the SAT tuner is connected, storing an SAT
radio channel into a preset failed.
t Be sure to receive the channel that you want to
store, then try it again.
L. SEEK +/–
The local seek mode is on during automatic tuning.
The disc does not contain a music file.
t Insert a music CD in this unit.
A disc/album/artist/track name is not written in the
There may be an internal malfunction.
t Check the connection. If the error indication
remains on in the display, consult your nearest
PUSH EJT (CDX-GT250MP only)
The disc cannot be ejected.
t Press Z (eject) (page 6).
The unit is reading all track and album information on
t Wait until reading is complete and playback starts
automatically. Depending on the disc structure, it
may take more than a minute.
RESET (CDX-GT350MP only)
This unit cannot be operated due to a problem.
t Press the RESET button (page 4).
" or "
During reverse or fast-forward, you have reached the
beginning or the end of the disc and you cannot go any
The character cannot be displayed with the unit.
If these solutions do not help improve the situation,
consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at the
time the problem began.