Sealey S701 Instructions

Item Part No. Description Item
3 NA93-03 Gasket 16
4 NA93-04 Baffle 17
5 NA93-05 Lock nut 18
6 NA93-06 Nipple 21
7 NA93-07 Packing 22
8 NA93-08 Packing gland 23
9 NA93-09 Trigger bearing stud 24
10 NA93-10 Trigger
11 NA93-11 Screw
12 NA93-12 Nipple
13 NA93-13 Gasket
14 NA93-14 Bushing
Note: Items marked ‘A’ are available in the three Set Up sets.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No responsibility is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your name and address, including postcode.
Sole UK Distributor,
01284 757500
Sealey Group,
Bury St. Edmunds, Suffolk.
PARTS FOR:
PAINT SPRAY GUN
S701
Model:
Issue : 1
Date : 080802
Part No. Description
NA93-16 Spring
NA93-17 Adjusting screw
NA93-18 Fan adjustment assembly
NA93-21 Air valve assembly
NA93-P-09 Pot
NA93-P-10 Pot lid assembly
S701-B Gun body, gold
Set Ups
NA93-SET-15 1.5mm Set up
NA93-SET-16 1.6mm Set up
NA93-SET-18 1.8mm Set up
E-mail: sales@sealey.co.uk
01284 703534
Web: www.sealey.co.uk
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used
according to these instructions and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
! Familiarise yourself with the application, limitations and potential hazards peculiar to the spray gun.
F WARNING! Disconnect the spray gun from the air supply before changing accessories, servicing or
performing any maintenance.
! Maintain the spray gun in good condition (use an authorised service agent).
! Replace or repair damaged parts. Use recommended parts only. Unauthorised parts may be dangerous
and will invalidate the warranty.
! Keep the spray gun clean for best and safest performance.
! Wear approved safety respiratory protection and safety eye goggles.
! If spraying isocyanate based finisher, wear approved respirator/clean air breathing apparatus and cover
exposed skin with latex gloves and an impervious hooded coverall.
! Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and tie back long hair.
! Locate the spray gun in a suitable work area. Keep area clean and tidy and free from unrelated materials
and ensure that there is adequate ventilation and lighting.
! Keep children and unauthorised persons away from the work area.
! When not in use, ensure that the air supply is turned off.
! Avoid unintentional operation of spray gun.
% DO NOT point spray gun at yourself, other persons or animals.
% DO NOT direct air from the air hose at yourself, other persons or animals.
% DO NOT carry the spray gun by the hose, or yank the hose from the air supply.
% DO NOT exceed the maximum air pressure of 70psi.
% DO NOT use the spray gun for any purpose other than that for which it is designed.
% DO NOT allow untrained persons to operate the spray gun.
% DO NOT get the spray gun wet or use in damp or wet locations or in areas where there is condensation.
% DO NOT operate the spray gun if any parts are missing or damaged as this may cause failure and/or
personal injury.
2. DESCRIPTION & SPECIFICATIONS
2.1 Description
2.1.1. Suction feed spray gun suitable for applying finishing coats. Supplied with cam action suction pot.
Suitable for a wide range of materials. Nozzle and needle in Stainless Steel to allow for use with water based
paints.
2.2 Specifications
Standard set-up . . . . . . . . . . . . . . . . . . . . .1.8mm
Available set-ups . . . . . . . . . . . . . . . . .1.5, 1.6mm
Working pressure range . . . . . . . . . . . .30 - 70psi
Air consumption . . . . . . . . . . . . . . . . . . .7 - 12cfm
INSTRUCTIONS FOR:
PAINT SPRAY GUN
S701
Model:
S701 - 1 - 080802