Length Of Your Calls; Resetting The Call Timers - NEC TalkTime Max 962 Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

3) Unlocking is carried out in the same way. Press FCN +

cleared the display will go back to the standby mode. If the key is incorrect the

display will remain with the PL indicator in the upper right hand corner of the

display.

Feb 2

12:00 a m

Home

CORRECT

The phone allows you to check the duration of your calls. Upon sending or

receiving a call, the current call timer begins counting. This can be viewed at

anytime on the display.

Signal Strength Indicator

Talk Time of call in progress

In Use Indicator

Note: The current call timer will be reset upon receipt or sending of another

call. It will also be reset if PWR is turned off and on again. You can manually

reset the current call timer by pressing CLR.

Call timers are used to let you know how much air time you are using both in the

home and roam modes. This will allow you to control your air time as you desire.

Your phones call timers can be reset to zero at any time you desire. To view your

call timers.

1) Press FCN + 1.

Note: You must have your phones lock code before you can reset your call

timers. The lock code is supplied by the dealer. If you forget your lock code

contact your dealer.

The factory default lock code is 0000.

1) Press FCN + 6.

2) Enter your 4-digit lock code.

Note: For security the display will not show the 4-digit lock code.

Feb 2

12:00 a m

Home

INCORRECT