Installing The Camera - Lorex H871T6D-4BA2 Quick Start Manual

7

Installing the Camera

Camera
Adjustable screw
To install the camera:
1. Stick the mounting template to the mounting surface or hold it up to mark the holes.
Optional: Drill holes to insert the anchors if installing on concrete, stucco, brick, or
any other masonry surface. Use a 7/32" or 15/64" drill bit (5.5 - 6mm).
2. Match the arrow side of the mounting plate
template (see Figure 1).
H871T6D-4BA2-E_QSG_EN_R1.indd 12 H871T6D-4BA2-E_QSG_EN_R1.indd 12
Figure 1
Mounting
Screws
bracket
Mounting plate
Mounting
Anchors
surface
(Optional)
Mounting template
to the arrow side of the mounting
2020-09-01 11:57:57 AM 2020-09-01 11:57:57 AM