Bang & Olufsen BeoLab 5 User Manual page 9

POWER LINK
DIGITAL
POWER LINK
For connections in other Bang & Olufsen digital
systems, please refer to the Guide enclosed with
those systems.
POWER LINK
DIGITAL
POWER LINK
DIGITAL
Connection to Bang & Olufsen
systems
The loudspeaker can be connected to all
Bang & Olufsen audio and video systems
equipped with Power Link sockets. It can also
be connected to Bang & Olufsen systems that
have a digital output socket.
Remember to set the switch marked RIGHT–LEFT
to the correct position on each loudspeaker!
POWER LINK connections
Use the enclosed Power Link cables to connect the
loudspeakers to your system. Power Link
connections may be run in two ways as explained
on page 8.
Longer cables are available from your Bang &
Olufsen retailer. However, you should not use
longer cables than necesassary.
IMPORTANT: Use fully mounted Power Link cables
only – not the very thin type! If the wrong type of
Power Link cables are used, the loudspeaker will
not play. If in doubt, ask your Bang & Olufsen
retailer.
DIGITAL connections
If your Bang & Olufsen system has a digital output
DIGITAL
socket, we recommend that you connect the
loudspeakers directly to this socket as well. This
ensures optimal sound quality when playing digital
sources (CD's). Use Bang & Olufsen approved
phono cables to connect the loudspeakers to your
system.
9