Transportation And Changing Of Installation Position; Before Calling Your After Sales Service - SchaubLorenz SLS E136W0M User Manual

TRANSPORTATION AND CHANGING OF
PART 5.
INSTALLATION POSITION

Transportation and changing of Installation position

• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a strong
• Before transporting
installation position, all the moving objects
(ie,shelves,crisper...) should be taken out or
getting damaged.
Carry your fridge in the upright position.
PART 6.

BEFORE CALLING YOUR AFTER SALES SERVICE

rope. The instructions written on the corrugated box must be followed while transporting.
If your fridge is not working properly, it may be a minor problem, therefore check the following.
fixed with bands in order to prevent them from
The appliance does not operate,
Check if:
• There is a power failure.
• The mains plug is not plugged in properly, or is loose.
• The thermostat setting is on position " ".
• The socket is defective. To check this, plug in another appliance that you know is working
into the same socket.
The appliance performs poorly,
Check if:
• You have overloaded the appliance.
• The door is not closed properly.
• There are not enough ventilation ducts in the kitchen unit as mentioned in the installation
manual.
If there is noise:
The cooling gas which circulates in the fridge circuit may make a slight noise (bubbling
sound) even when the compressor is not running. Do not worry, this is quite normal. If you
• Objects on the appliance are vibrating.
hear different sounds, check if:
• The appliance is installed firmly as described in the installation manual.
or changing the
EN -10-