Intended Use - Renkforce DAB+ RF-DAB-CAR1 Operating Instructions Manual

3. Intended Use

The Renkforce DAB+ RF-DAB-CAR1 car receiver is used to receive DAB radio stations in
vehicles, play audio data from suitable storage media and amplify and play back the audio
signals thus obtained. It also serves as hands-free system and a playback device for mobile
phones with Bluetooth technology.
®
Playback takes place via the car radio and the speakers connected to it.
This product is only approved for the connection to 12-24 V direct current on-board networks
with the negative pole of the battery to the car body. The car receiver must only be installed and
operated in vehicles with this kind of on-board voltage.
The user must make sure that the way the product is installed protects the product from
humidity and wetness. Contact with moisture must be avoided under all circumstances.
For reasons of safety and approval, the product must not be converted and/or changed by
you. Using the product for any other purposes than those described above may damage
the product. Improper use also may cause dangers such as short circuit, fire, etc. Read the
operating instructions precisely and keep them. Only pass the product on to any third parties
together with the operating instructions.
The word mark Bluetooth is a registered trademark of Bluetooth SIG, Inc. Use of this word
®
mark was licensed.
Other brands and trade names are trademarks of their respective owners. All rights reserved.
26