Subscribe to Our Youtube Channel
Related Manuals for Afag WV 630-1
Summary of Contents for Afag WV 630-1
- Page 1 Bowl feeder WV 630-1 Translation of operating and installation instructions Copyright by Afag GmbH...
- Page 2 This operation instruction applies to: Type Order number Right 50455916 Bowl feeder WV630-1 230 V / 50 Hz Left 50470026 Version of Documentation: BA_WV630-1_R01.0_EN.docx Release: R01.0 Date: 16/05/2019 Page 2 16/05/2019 R01.0...
-
Page 3: Table Of Contents
Table of contents: Safety instructions ....................4 Notes on symbols and instructions ......................4 Basic safety information ........................... 5 Appropriate use ............................5 Notes for Pacemakers and Defibrillators ....................6 Description of the device ..................7 General ..............................7 Functional description ..........................7 Definition of the feed direction ......................... -
Page 4: Safety Instructions
1 Safety instructions 1.1 Notes on symbols and instructions Symbols: Assembly and commissioning must be carried out by qualified personnel only and according to these operating instructions. Please observe the meaning of the following symbols and notes. They are grouped into risk levels and classified according to ISO 3864-2. -
Page 5: Basic Safety Information
1.2 Basic safety information This operating manual provides the basis for the safe use and operation of the bowl feeder. This operating manual and, in particular, the included safety instructions have to be ob- served by all individuals working with and on the bowl feeder. In addition, all rules and regulations concerning the accident prevention applicable for the site of operation are to be complied with. -
Page 6: Notes For Pacemakers And Defibrillators
1.4 Notes for Pacemakers and Defibrillators Afag vibration conveyors are tested in accordance with regulation 15 of the German Statutory Accident Insurance Association [Deutsche Gesetzliche Unfallversicherung, DGUV] (previously BGV B11 of German Accident Prevention Regulations). The permissible values of exposure area 2 are not exceeded, therefore no measures are required pursuant to Section 4 (2) of the DGUV regulation 15. -
Page 7: Description Of The Device
2 Description of the device 2.1 General In combination with a conveyor bowl, the bowl feeder is used for storing, transporting, separating and arranging bulk material. The material is moved by vibrations. Parts are moved by micro throws in the feeding direction. The mass of the bowl should not exceed the value specified in chapter 2.4 as this cannot ensure optimum transport behaviour. -
Page 8: Definition Of The Feed Direction
The magnet, connected to the support, creates a force which attracts reps. releases the oscillating plate dependent on the oscillation frequency of the power supply. The pulsating movement of the oscillation plate causes the material to jump from the rail at each oscillation and is conveyed as a result of the angle of inclination of the leaf springs. -
Page 9: Technical Data
2.4 Technical data Table 1: Technical data Description Units WV630-1 [mm] 660x248 Dimensions øxH [kg] Weight (without bowl) [IP] Protection class Connecting cable length [VA] 1260 Power consumption Current consumption [V/Hz] 230/50 Magnet nominal voltage / frequency Number of magnets WS_9B_55 Magnet type Black... -
Page 10: Assembly Instructions
3 Assembly instructions 3.1 Transport WARNING Improper use of transport means (industrial trucks, cranes, tech- nical aids, sling gear etc.) may lead to bruises and other injuries. Required behaviour: ▪ Observe and follow the transport and maintenance instruc- tions ▪ Proper use of transport means CAUTION During transport, the bowl feeder must only be held by the base. -
Page 11: Requirements For The Bowl
3.3 Requirements for the bowl In order to achieve optimum transport behaviour, the following basic requirements must be fulfilled: 1. Combination bowl and WV must match each other 2. Selection resistant construction of the bowl 3. Control elements in the bowl must be oscillation resistant 3.4 Information for the construction of selection elements Selection elements, which serve the sorting of the transported work pieces in the correct orientation, must be of light but stable manufacture. -
Page 12: Operating Instructions
4 Operating instructions 4.1 Correlations between the transport speed and the WV spring packages In principle, the WV and bowl are adjusted in the standard configuration. This means that all oscillating elements of the system are optimally designed. The following factors however influence the combination WV/bowl: a) the parts to be conveyed (size, weight, shape, material and condition) b) the conveying capacity c) the quantity filled... - Page 13 The result: Transport speed is reduced a) insert additional springs b) at first, one spring in one spring package c) if this is insufficient, then one spring with spacer plate is to be inserted into the individual spring packages one by one Transport speed is increased a) remove springs b) the procedure and sequence are the same as for inserting springs...
-
Page 14: Torques
4.2 Torques Tightening torques M in Nm for shank screws with metric ISO control threads and head supports according to DIN 912 or DIN 931: Tightening torques M in Nm Screw Strength class 8.8 Strength class 10.9 Strength class 12.9 14,0 16,5 (M7) -
Page 15: Maintenance Guidelines
▪ Before removing the casing, unplug the power cable! Interruptions caused by defective components must be repaired by replacing the defective component, only. NOTE Defective components must only be replaced by Afag original spare parts. (See chapter 5.3) R01.0 16/05/2019... - Page 16 Bowl feeder does not run after switch on Cause of fault: Fault repair Plug not connected Connect plug Connecting cable between bowl feeder Connect plug and controller not plugged in Regulator on controller set to „0“ Turn regulator to position Defective fuse in control unit Replace fuse Bowl feeder lacks performance after operating for a certain length of time...
-
Page 17: Cleaning
5.2 Cleaning Coating:: Detergent: Cleaning method: hard-anodised / Inox pol- Alcohol or spirit Ultrasonic bath ished Metaline Soap water clean with a damp cloth, let it dry Habasit light green neither vacuum cleaner Habasit white, dark green Alcohol or spirit Clean with a damp cloth and let it Polyurethane red, yellow dry. - Page 18 Page 18 16/05/2019 R01.0...
-
Page 19: Accessories
Soft-starting, all IRG and MSG types can be mounted in various different ways and offer extra controls for photoelectric barriers, initiator elements, or extern 24VDC signal. For a detailed description of the controllers refer full-range catalogue from AFAG GmbH. Third-party controllers can also be used as long as they meet the technical requirements. -
Page 20: Address For Orders
6.3 Address for orders Germany: Switzerland: Afag GmbH Afag Automation AG Wernher-von-Braun-Straße 1 Zuführtechnik D – 92224 Amberg Fiechtenstrasse32 CH – 4950 Huttwil Tel.: ++49 (0) 96 21 / 65 0 27-0 Fax: ++49 (0) 96 21 / 65 0 27-490 Tel.: ++41 (0) 62 / 959 86 86... -
Page 21: Disposal
7 Disposal WF feeders that are no longer in use should not be disposed of as complete units but dismantled into separate materials and recycled. Non-recyclable components must be dis- posed of correctly. R01.0 16/05/2019 Page 21...
Need help?
Do you have a question about the WV 630-1 and is the answer not in the manual?
Questions and answers