Related Manuals for EKKO EB12E Series
Summary of Contents for EKKO EB12E Series
- Page 1 The Specification EB12E Series Semi-Electric Stacker Note: Before using, please read this manual! EKKO Material Handling Equipment Manufacturing, Inc.
-
Page 2: Table Of Contents
- 1 - Contents 1. The correct use of Electric stacker ..........- 2 - 2. Warning,the residual risk and safety instructions ....... - 6 - 3. Commissioning, transport, outage ..........- 7 - 4. Daily inspection ................- 8 - 5. -
Page 3: The Correct Use Of Electric Stacker
- 2 - 1. The correct use of Electric stacker Allow only based on this manual use this electric stacker. Described in this manual stacker walking electric stacker, with electric operation to control the height of lifting function. High car is in order to ascend and reduce the transportation load to the desired lifting height and design. - Page 4 - 3 - Model EB12E Load capacity (lb) 2640 Load capacity on Max. height(kg) (lb) 1540 The max. lifting height (in) 119.4 Load center distance (in) Fork length (in) Single fork width (in) Overall fork width (in) 8.3-33.5 Lowered fork height (in) 2.35 Fixed leg length...
- Page 5 - 4 - 1.3 Optional C. Safety devices and warning label, description A The hook label B The warning label: Do not stand at the fork below or the goods fork C Load curve icon paste D Read and observe the instructions of the label E 'no take' label F Nameplate (3) The emergency stop switch...
- Page 6 - 5 - Insert the key and switch (16) clockwise rotation. This car pile high, to prevent unauthorized use, key needs to be counterclockwise. Rotating and pull out. This car pile high with belly switch (14), when the vehicle to the operator when running in a party, if the operating handle.
-
Page 7: Warning,The Residual Risk And Safety Instructions
- 6 - 2.Warning, the residual risk and safety instructions Warning-----Please do not: 1/ In outdoor travel, stacking operation. The cargo lifting height is higher than the height of the lifting point (<11.8in). 2/ A foot or hand put the lifting mechanism or into the lifting mechanism in. 3/ Allow non-operating personnel in the vehicle or the lifting / lowering when standing in front of or behind the vehicle pile high. -
Page 8: Commissioning, Transport, Outage
- 7 - 3.Commissioning, transport, outage 3.1 Test Re commissioning on receipt of our new car pile high or needs, please in the (first) the following steps before operation vehicle: The final installation and charging a battery (see Chapter sixth) Work according to the inspection and routine inspection machine function. 3.2 lifting / transport. -
Page 9: Daily Inspection
- 8 - Transport: A. In the process of transportation vehicles must be firmly fixed in truck or truck. B. Reduce the fork to the lowest position and vehicle safety park. Use stainless steel tie transverse lashing car leg through the tray at the bottom middle gap, C. -
Page 10: Operating Instructions
- 9 - 5. Operating instructions The operation of this car, please follow the warning and safety instructions (see chapter second). The operation of this car, please see to it that the goods or other equipment will not lead to a lack of visibility! To ensure that the goods and stable placement, and daily check. - Page 11 - 10 - 5.4 Down If the fork is on the shelf, first carefully the vehicle together with the tray rack or separate vehicles removed from shelves. Carefully press the down button. Goods will be reduced until the fork left tray rack, and then carefully pulled away from the goods.
- Page 12 - 11 - Fig 8: The direction of the operation 5.6. Steering To move around by the handle for vehicle. 5.7. Brake Load braking performance depends on the road conditions and vehicle. Brake function can be activated by the following ways through the accelerator button (12) moved back to '0' position or the release of this button, the regenerative braking is activated.
-
Page 13: Battery Charging And Replacement
- 12 - When you meet the emergency, press the emergency stop switch (2). All electrical functions will stop. Keep a safe distance. 6.Battery charging and replacement 1/ Only qualified personnel for repair or to recharge the battery. Please be sure to abide by the operation manual and battery manufacturer's instructions. -
Page 14: Regular Maintenance
- 13 - 6.3. Charge Optional automatic voltage charger lorry with can only be applicable to the mentioned 110V or 220V. Charging space must ensure good ventilation. After the completion of the battery, disconnect the connector from the socket, and put it in the specified storage space. 7.Regular maintenance Only qualified and trained personnel can this car maintenance. - Page 15 - 14 - 7.1. Maintain inventory Table4: Maintain inventory The interval of time (month) Check the hydraulic oil cylinder, the piston is there noise and ● leakage damage Check the hydraulic connections and tubing for damage and ● leakage ● Check the hydraulic oil level, then fill if necessary ●...
- Page 16 - 15 - ● Test buzzer ● Air gap electromagnetic brake check ● Detection of the emergency brake function ● Detection of reverse braking and regenerative braking function ● Detection of belly switch function ● Check the steering function ● Check the lifting and lowering function ●...
-
Page 17: Fault Analysis
- 16 - 1、The wheel bearing 2、The door frame 3、Chain 4、Hydraulic system 5、Steering bearing 6、Gear box 7.3. inspection and hydraulic oil refill needed hydraulic oil type Anti-wear hydraulic oil 32# Viscosity is 32 - 38 Based on the model, the amount of oil is from ~2.5L to 3.0L. Waste materials such as waste oil, waste batteries or other materials must be recycled according to national law. - Page 18 - 17 - dropped Declining electromagnetic valve Check or replace down solenoid does not open or damage valve High car pile can not The battery is charging With the battery completely, and operate then the main power supply plug Battery is not connected The battery is connected correctly from the power socket pull Fuse failure...