Examples For Mounting - HBM KMR Mounting Instructions

24
KMR

5.3 Examples for mounting

The following examples for installation show the various possibilities to use
the KMR.
• Monitoring flange joints
With this measurement set-up, critical flange joints or the setting of screws
(max. property class 14.9) can be monitored.
CAUTION
Please ensure when tightening the screws that the connecting cable is not
sheared off. Slightly lubricate the supporting surface of screw head or nut to
prevent the transducer from turning during fastening of the screw. You thus
avoid shearing off the cable connection.
Washer
KMR
Washer
Fig. 5.1: Monitoring a screw preload
HBM A2114-1.0 de/en