Sitrans Dtm; The Instrument Edd; Configuring A New Device Via Fdt - Siemens SITRANS LR200 7ML5422 Operating Instructions Manual

6.3.3.2

SITRANS DTM

● SITRANS DTM is an EDDL interpreter developed by Siemens to interpret the EDD for
that device.
● To use SITRANS DTM to connect to a device, you must first install SITRANS DTM on
your system and then install the device EDD written for SITRANS DTM.
● You can download SITRANS DTM from the Siemens service and support website. Go to
Siemens Industry Online Support (https://support.industry.siemens.com/cs/?lc=en-WW),
click on Product Support, and drill down to Product Information/Automation
Technology/Sensor systems/Process Instrumentation/Software & Communications.
6.3.3.3

The instrument EDD

The SITRANS LR200 HART EDD for SITRANS DTM can be downloaded from the product
page of our website at www.siemens.com/LR200 (www.siemens.com/LR200). Go to Support
> Software Downloads.
6.3.3.4

Configuring a new device via FDT

The full process to configure a field device via FDT is outlined in an Application Guide which
can be downloaded from our website under Support > Application Guides.
LR200 (www.siemens.com/LR200)
96
SITRANS LR200 with mA/HART
Operating Instructions, 05/2019, A5E32337676-AE