CTEK Z45 Series User Manual page 24

Tools
The Z4550 comes standard with two tools installed.
Flash Update Client
The Flash Update client provides a mechanism to load over-the-air firmware update
and to enable additional applications on the controller. The Flash Update client can be
configured for periodic (daily/weekly/monthly) updates, or to perform the updates ad-
hoc when the user initiates an update request.
Backup and Restore
Backup and Restore works in conjunction with a USB stick inserted in the type A USB
connector. The USB stick should be formatted as FAT32. Types of backups possible
include:
 Automation Control
 Navigation Services
 Entire System
 Product Branding
 Logs (WAN and System logs)
In addition to a restore option for each backup categories listed above, an additional
type of restore allows update installer files to be applied to a Controller via the USB
drive.
Applications
The Z4550 comes standard with the Automation-Light application installed. Automation-
Lite is a scaled back version of the complete Automation application, which can be
licensed from Ctek. See Application Note APN008 for details on the Automation
application.
Z45X SERIES INDUSTRIAL CONTROLLERS - DECEMBER 23, 2020 24