Application Parameters; Location; Application Alarming; Application Logging - CTEK Z45 Series User Manual

Application Parameters

Location

The location name that will be displayed on the dashboard, on SkyCloud, and in reports
and alarms

Application Alarming

Enables or disables alarms, selects alarm delivery mechanisms, assigns email addresses
and phone numbers for alarm delivery, and assigns GPS/Location coordinates to alarms

Application Logging

Enables or disables application logging, enables or disables log deliver via email,
selects a log delivery schedule, and assigns email addresses of log recipients

Email Configuration

The Z4550 has a resident POP3 email server that is used to deliver alarms and logs. This
panel is used to configure the controller with email account information. This set up
should be identical to setting up any email client such as Outlook or Thunderbird.

Dashboard Groups

This panel is used to assign names to the display groups shown on the automation
dashboard

Dashboard Options

This function is used to configure the number (1-5) of named display groups that will
appear on a single row of the dashboard.

Local Interfaces

Port Forwarding

In the gateway mode of operation (see section 5.1) the Z4550 Controller routes data to
and from the wireless network IP connection to a class C range of local (private) IP
addresses available on the RJ45 Ethernet connector. To accomplish this the Port
Forwarding screen allows you to forward WAN side IP traffic arriving on a specific IP Port
to a specific Port at a designated LAN side address. In addition, this screen also allows
you to make a named (advertised) service available over the WAN interface.
Each forwarding rules consists of the following field:
Z45X SERIES INDUSTRIAL CONTROLLERS - DECEMBER 23, 2020 18