AudioCodes Mediant 500Li Quick Setup Manual page 8

10. To assign a static IP address, run the following commands:
(conf-if-GE 0/0)# ip address <IP Address> <Subnet Mask>
(conf-if-GE 0/0)# exit
(config-data)# ip route 0.0.0.0 0.0.0.0 <Default Gateway> gigabitethernet 0/0
(config-data)# do write
(config-data)# exit
11. To obtain an IP address from a DHCP server, run the following commands:
(conf-if-GE 0/0)# ip address dhcp
(conf-if-GE 0/0)# ip dhcp-client default-route
(conf-if-GE 0/0)# ip dns server auto
(conf-if-GE 0/0)# do write
(conf-if-GE 0/0)# exit
(config-data)# exit
8 | P a g e