AudioCodes Mediant 500Li Quick Setup Manual page 4

Physical Description of Rear Panel
1 2 3 4
1 POWER DC power plug entry for external AC/DC power adapter.
2 ON / OFF Power button to switch on (pressed in) and off (pressed out) the device.
3 CONSOLE RJ-45 port for RS-232 serial communication with the device.
4 // Reset pinhole button for resetting the device or restoring it to factory defaults. To
restore to factory defaults: with a paper clip or any other similar pointed object, press
and hold down the button for at least 12 seconds (but no more than 25 seconds).
Please note that the device will lose all its configuration!
5 S0 / WAN WAN interface port Giga Ethernet (10/100/1000Base-T)
6 S1 / FXS S1: Ports 1-4 of analog interface (FXS).
S2 / FXS S2: Ports 5-8 of analog interface (FXS).
5
Green On
Green Flashing
Off
4 |
Ethernet link established.
Data is received or transmitted.
No Ethernet link.
P a g e
6