Table of Contents
Advertisement
Next steps
1.
Install the expansion card
2. Follow the procedure listed in
Removing the riser card
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the expansion card
4. If installed,
remove the expansion
5. If applicable, disconnect the cable from the riser card.
Steps
1. Using a Phillips #2 screwdriver, remove the screws that secure the riser card to the expansion card riser.
2. Remove the riser card from the expansion card riser.
NOTE:
The procedure to remove the riser 1B card is similar to removing the riser 1A card.
Figure 50. Removing the riser card from riser 1
46
Installing and removing system components
riser.
after working inside your
Safety
instructions.
Before working inside your
riser.
card.
system.
system.
Advertisement
Table of Contents
