Table of Contents
Advertisement
How to change the position and size of the depth indication
Place the cursor near the depth indication, and a window frame appears. Drag and
drop the window to the location desired for the depth indication. Drag and drop the
window frame to change the size of the depth indication.
Operations available with two monitors
The setting of [Sub Monitor Display Switching], which is set at installation, determines
what appears on the sub monitor.
• [Dual]: The sub monitor shows the FCV-38 logo. Windows such as graphs can be
dragged from the main monitor to the sub monitor, as shown in the figure below.
Further, the picture from an external fish finder can be shown depending on the set-
ting for the external fish finder window. See section 1.21.
Main monitor
• [Clone]: Clones the picture on the main monitor to the sub monitor.
Main monitor
Window frame
Sub monitor
Sub monitor
1. OPERATION
1
1-3
Advertisement
Table of Contents
Troubleshooting
