Power On Titles; Control Outputs - B&K Reference 50 Owner's Manual

Power On Titles

When you turn your processor on it displays two lines of text. You can change this text to a personalized
message. Make sure you are in the ADVANCED SYSTEM SETUP menu and the remote is in B&K mode.
ADVANCED SYSTEM SETUP
1 Zone 1 Setup 'A'
2 Zone 2 Setup 'B'
3 Power On Titles 3 Power On Titles
4 Control Out
5 Security Options
6 DSP Usage
7 RS-232 Control Port
next item
MENU setup system
POWER ON TITLES
From Remote
1 À(UP) or §(DOWN)
2 SEL or ENTER
3 À(UP) or §(DOWN)
4 SEL or ENTER
5 À(UP) or §(DOWN)
¶ •
6
(LEFT) or (RIGHT)
7 repeat 5 – 6
8 SEL or ENTER
9 À(UP) or §(DOWN)
10 repeat 4 – 8
11 MENU

Control Outputs

Your processor's control outputs allow you to control up to 4 external devices such as power amplifiers, projection
screens, etc. Each control output can be programmed on (a source of 12VDC @ 50 mA) or off (0 VDC)
depending on which source is selected. They may also be set to headphone listening, remote repeater or RS-232
(see BKC-DIP documentation). Make sure you are in the ADVANCED SYSTEM SETUP menu and the remote is
in B&K mode.
ADVANCED SYSTEM SETUP
1 Zone 1 Setup 'A'
2 Zone 2 Setup 'B'
3 Power On Titles
4 Control Out
4 Control Out
5 Security Options
6 DSP Usage
7 RS-232 Control Port
next item
MENU setup system
CONTROL OUT
From Remote
1 À(UP) or §(DOWN)
2 SEL or ENTER
SEL select
From Front Panel
(UP) or (DOWN)
(ENTER)
(UP) or (DOWN)
(ENTER)
(UP) or (DOWN)
VOLUME KNOB
repeat 5 – 6
(ENTER)
(UP) or (DOWN)
repeat 4 – 8
MENU
SEL select
From Front Panel
(UP) or (DOWN)
(ENTER)
69
POWER ON TITLES
1 Power On Line 1 1 Power On Line 1
' BK Components '
2 Power On Line 2
' * Digital DNA '
next item SEL
MENU advanced setup
POWER ON LINE 1
Action
move to Power On Titles
activate ADVANCED POWER ON TITLES
move to Power On Line 1
activate Line 1
change blinking character. See Pg 3
move to new character
continue changing characters
finish editing line 1
move to Power On Line 2
edit Line 2
return to ADVANCED SYSTEM SETUP
CONTROL OUT SETUP
1 Control Out 1
1 Control Out 1
2 Control Out 2
3 Control Out 3
4 Control Out 4
next item SEL select
MENU advanced setup
CONTROL OUT 1
Action
move to Control Out
activate CONTROL OUT SETTINGS
edit