B&K Reference 50 Owner's Manual page 70

Zone 2 (B) Level Control - You may wish to install an in-wall volume control in your second zone. This can
cause confusion between your processor's internal Zone 2 (B) volume controls and your in-wall controls.
WARNING - Setting Zone 2 (B) LEVEL CONTROL to FIXED will cause your processor to immediately send
its maximum Zone 2 (B) volume to your second zone (if Zone 2 (B) is on). Turn down your in-wall volume
controls before making this change.
ADVANCED ZONE B SETTINGS
1 Level Control
1 Level Control
2 Fixed Level
3 Zone ID
4 V2 Output
5 Link Input to Zone A
6 Link Power to Zone A
next item
MENU advanced setup
ZB LVL VARIABLE
From Remote
À(UP) or §(DOWN)
1
2 ¶ •
(LEFT) or (RIGHT)
Zone 2 (B) Max (Fixed or Variable) Level - Zone 2 (B)'s max level allows you to set a maximum volume level for
Zone 2 (B). This is very useful if you are using speakers that can't handle the maximum power output from your
external amplifier or if you simply wish to limit the volume that can be achieved using normal front panel or remote
operation. If you have chosen Zone 2 (B) level control (fixed), then this setting becomes the fixed level for Zone 2
(B). If you have chosen Zone 2 (B) level control (variable) then this setting allows the level for Zone 2 (B) to be
adjusted. However, when adjusting this level it cannot exceed the value set in Zone 2 (B) max level.
WARNING - If you set this level too low, the processor may appear broken (no sound).
ADVANCED ZONE B SETTINGS
1 Level Control
2 Fixed Level
2 Fixed Level
3 Zone ID
4 V2 Output
5 Link Input to Zone A
6 Link Power to Zone A
next item
MENU advanced setup
ZB MAX LEVEL +15
From Remote
1 À(UP) or §(DOWN)
2 ¶ •
(LEFT) or (RIGHT)
Variable
Variable
+15 dB
2
Tape
No
No
adjust
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
Variable
+15 dB
+15 dB
2
Tape
No
No
adjust
From Front Panel
(UP) or (DOWN)
VOLUME KNOB
66
ADVANCED ZONE B SETTINGS
1 Level Control Fixed
1 Level Control Fixed
2 Fixed Level +15 dB
3 Zone ID 2
4 V2 Output Tape
5 Link Input to Zone A No
6 Link Power to Zone A No
next item adjust
MENU advanced setup
ZB LVL FIXED
Action
move to Level Control
adjust level to desired value
ADVANCED ZONE B SETTINGS
1 Level Control Fixed
2 Fixed Level +15 dB
2 Fixed Level +15 dB
3 Zone ID 2
4 V2 Output Tape
5 Link Input to Zone A No
6 Link Power to Zone A No
next item adjust
MENU advanced setup
ZB FIX LEVEL +15
Action
move to Fixed Level
adjust level to desired value