Omega THDP-10 Series Manual

Omega THDP-10 Series Manual

Emperature/humidity/dew point meter with optional data logging function

Advertisement

Quick Links

2
TM
User's Guide
Shop online at
omega.com
e-mail: info@omega.com
For latest product manuals:
omega.com/en-us/pdf-manuals
THDP-10 Series
Temperature/Humidity/Dew Point Meter
with Optional Data Logging Function

Advertisement

Table of Contents
loading

Summary of Contents for Omega THDP-10 Series

  • Page 1 User’s Guide Shop online at omega.com e-mail: info@omega.com For latest product manuals: omega.com/en-us/pdf-manuals THDP-10 Series Temperature/Humidity/Dew Point Meter with Optional Data Logging Function...
  • Page 2 Fax: (203) 359-7700 e-mail: info@omega.com For Other Locations Visit omega.com/worldwide The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.
  • Page 3: Material Supplied

    FEATURES 1) Temperature measurement: Ambient Temp. Dew Point Temp. Wet Bulb Temp. (THDP-10), Heat index, WBGT temperature measurement (THDP-10-DL). 2) Hold function: Freeze current readings on LCD. 3) High/Low Temp. & RH alarm threshold setting. 4) Function: Maximum, Minimum, Average and Recall. 5) Auto power off function: Save power energy when not used.
  • Page 4: Operation

    LCD FULL DISPLAY OPERATION (1) POWER ON/OFF Short press” PWR” button to turn on the meter, press and hold for 2 seconds to turn off the meter. (2) MAX/MIN/AVG Short press MAX/MIN button to cycle display Maximum, Minimum, Average readings of Temperature and RH since powered on.
  • Page 5: Clear Memory

    flashing for changing digit. Short press UNIT button to enter LO alarm setting, follow the same step as you set for temperature. Press and hold SET button to save and back to normal measurement mode. (9) RECORD 99 POINTS (THDP-10 only) Short press SET button to save current readings (temp.
  • Page 6 (2) Save Data (txt. Format) Save data: Press File in tool bar, then click Save File to save data in designated folder or press Floppy icon to save data. File is saved as txt. format (3) Open File Red line is timeline, you can move it to see the readings in recorded times (4) View Data Table Save Data Table: Select View to save Data Table as Excel file.
  • Page 7: Warranty

    The reading keeps updating while you still in excel status. If you don’t close excel after you save the file, the reading also updating automatically. (5) Data Table (Excel) Saved file Blank part is interval of the saved file saved file and not Not saved file (Keep updating) NOTE: Select temperature unit ℃℉...
  • Page 8 Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANTY does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification.

This manual is also suitable for:

Thdp-10Thdp-10-dl

Table of Contents