Navigating In The Operating Menu - Prosense ETS Series Operating Instructions Manual

User Manual - ETS Series Digital Temperature Sensors

5.2 Navigating in the Operating Menu

7.
SAVE
1. Enter the operating menu.
Press the E key for longer than 3 seconds.
2. Select the "Function group" with the + or - key.
3. Select the "Function" with the E key.
4. Enter or change parameters with the + or - key.
Then return to "Function" with the E key.
Note: If software locking is enabled, it must be disabled before making entries or
changes.
5. Press the E key several times to return to the "Function group" - until the appropriate
function group is reached again.
6. To exit, press the E key for longer than 3 seconds. If changes were made, see step 7.
7. Query to save data (select "YES" or "NO" with the + or - key) - confirm with the E
key.
6
ETS Digital Temperature Sensors Rev. 1
BASE
E
> 3 s
E
1.
E
6.
> 3 s
A Function group selection
B Function selection
Changes to the parameter settings only become effective if you choose 'YES'
when asked to save data.
A
E
5.
2.
E
E E
5.
B
E
4.
3.
E E
E