[7]
Error Messages
–
During the operation when an error occurs, a message will appear in the
notification area. Tap anywhere in the rectangle to acknowledge the warning.
Active error
message
Tap in here to
acknowledge
Whenever there are warnings or errors, they are added to a list (log) in the notification area. To
clear the log, press and hold anywhere in the rectangle for 5 seconds
Use finger to swipe
up and down to see
all logged
warnings/errors
[8]
Gate Position
– This indicates current gate
gate position can be adjusted here when using a Manual gate. Please refer to the
Manual Gate Control section under Spreader Operation in this manual. Please refer to
the 660 Calibration Manual for setting up the gate control type.
2
Additional Feature Functions
2.1 Conveyor Forward and Reverse
The Conveyor can work in either forward or reverse direction selected by a rocker switch wired to a
digital input of the 660 system. The Reverse operation is indicated by a red "R" in the conveyor control
panel.
Conveyor
reversing
position and control type (Auto, Readbk, AirGate,
Bosch Rexroth Canada I December 2020 ı Revision 2.0
6/13
with a PGM key
inserted.
Man). The