Bosch Rexroth CS660 Operator's Manual page 5

Press here to show list
Swipe up and down to see
all available drivers
If the 4 th driver ID is configured as
to enter a custom name:
Type in custom name then
press here when complete
[6] Load WT
– This displays the current calculated weight of the solid material on the truck. The operator
enters the current weight, and as spreading is performed, the weight decreases. To enter the weight, press
and hold the weight for 5 seconds and a keypad will pop up:
Enter weight, then
press enter key
"USER", then the keyboard will appear when clicked. This allows the operator
Bosch Rexroth Canada I December 2020 ı Revision 2.0
5/13