Bosch Rexroth CS660 Operator's Manual page 4

[1] Status/Totals
– Display real time status and trip summary. Press&hold icon for 5 seconds to clear.
[2] Settings
– Switch to program mode ( a PGM key required)
[3] Speed
– Displays current ground speed. You can simulate ground speed by pressing and holding in the
circle for 5 seconds. The following arrows will appear which will allow you to adjust the speed:
Adjust speed Up/Down
[4]
Toolbox–This button changes depending whether a Program key is inserted into the display or not. When
not inserted, the icon is displayed. Pressing this icon will show the following:
When a Log or Program key are inserted you will see the
and Log transfer section in this manual for more information. This button also displays
status if gps or avl connection is active.
[5]
Driver ID
– This shows the current Driver ID, and allows the selection and naming of Driver IDs. To
select one of four Driver IDs, press on the Driver name and a list will drop down.
Vehicle stopped
Adjust Volume & Brightness
Bosch Rexroth Canada I December 2020 ı Revision 2.0
Vehicle in motion
Press and hold for 5 seconds
icon instead. Please see the Parameter
4/13
the gps/avl