Fermax DUOX VEO XS Quick Start Manual page 2

XS
START GUIDE FOR MONITOR VEO XS DUOX
CONTROL BUTTONS
Inductive loop label
(depending on the model)
F1
LEDs
Red LED:
Switched on. Monitor is idle.
Intermittent. Indicates that the Do Not Disturb feature is enabled.
Blue LED:
Intermittent. Monitor not programmed (idle).
Switched on. Conversation in hands-free audio mode.
On/Intermittent. Conversation in simple audio mode
4.2 USER MENU: DO NOT DISTURB MODE
This icon allows you to enable/disable the Dial Tone (Do Not Disturb).
Press the icon
call is heard).
The red LED on the monitor blinks slowly when the Do Not Disturb mode is active.
Note: If the Do Not Disturb mode is active, you may reactivate the call via this screen or
by sliding the potentiometer to any position other than the minimum.
2
DUOX VEO XS MONITOR
Digital menu for internal parameter settings and confi guration.
(When the monitor has already been programmed)
In conversation, press to open the door.
In standby, call to guard unit (if applicable).
F1 Auxiliary function, (contact your installer).
In standby, press and it displays the option of auto-starting with
different panels. By sequentially pressing Panel 0, Panel 1, General
Panel, (depending on the available panels).
Audio activation and hang-up (hands-free functions).
VEO XS monitor incorporates an OSD menu that is managed
via the monitor´s push buttons to access the terminals´user
and programming functions. The icons displayed are
managed with the corresponding buttons located on the
monitor.
to change the selection. By default normal operation is selected (The
Cod. 970042b V06_18