Brinkmann 6345 Series Owner's Manual page 30

Step 18
Attach the side burner assembly to
the right side of the grill body. Insert
two M6 x 12mm bolts halfway into
both right legs. Place side burner
assembly over bolts and slide
toward front of grill, then tighten
securely. Fasten side burner front
panel to grill body with one M6 X
12mm bolt.
Step 19
Attach the hose heat shield
to the right cart frame using two
#8 self-tapping screws.
Step 20
Remove two screws and washers
from the side burner valve. Insert the
side burner valve assembly through
the hole in the side burner front
panel, then firmly seat the valve
nozzle into the burner venturi. Hold
in place while you perform Step 21.
Warning: Never use your grill
without leak testing all
gas connections and
hoses. See the section on
"Leak Testing" in this
manual for proper
procedures.
29
Hose
Heat Shield
Side
Burner
Valve
Valve
Nozzle
Burner Venturi