Setup Of Vcount700Rp Gates - Ganz VCOUNT700RP Instruction Manual

PEOPLE COUNTING SYSTEM

2.4. Setup of VCOUNT700RP Gates

Once GXi devices into system are properly configured as per points 2.1, 2.2 and 2.3 it will
be possible to set VCOUNT700RP in order to perform counting.
First of all it is necessary to create desired gates from 'Add' button in 'Gates' menu,
setting name and type for each gate. Gate can be named without restriction in order to
easy identify it. Type can be selected among following options:
 SUM: sum of added counters.
 AVERAGE: average among added counters.
 PERCENT: percentage of counters added into 'camera counting zone' over counters
added into 'cameras counting the total value of clients'.
Select 'Save' to confirm selection.
Once gate is added, associate counter/s to gate by 'Add a camera menu'; below window
appears. User has to select counter number (*Camera filed on below snapshot) which
refers to value identified by X in point 2.3, selecting IN to get inX counting values or OUT
to get outX counting values, and so on. X identifies counter name set on GXi device.
There are no limitation on gates number that can be created into VCOUNT700RP server,
in order to let user configure as many gates as needed.
Gates are organized into Reports, as showed in following point 2.5
040515
CONFIGURATION - INSTR. MANUAL
8