Table of Contents
Advertisement
PEOPLE COUNTING SYSTEM
3. Network settings of VCOUNT700RP unit
In order to set the static IP address of VCOUNT700RP unit, you need to login into
configuration interface of network card, it is enable with port number 10000, by using
below command:
https://[ip_address]:10000/
Configuration interface enables you to select Static/DHCP address:
Default settings of network card:
Username: serwis
Password: serwisvcn
After logging in, you can see Maintenance Interface.
Please select „Network Interfaces" to display all network settings:
Network Settings:
Please edit eth0 option by double click on „eth0"
040515
CONFIGURATION - INSTR. MANUAL
12
Advertisement
Table of Contents
