Operating instructions
Controller - AIR1-BE TOUCH
activate application".
4 .2 .3 Configuration
"Configuration" - Same function as the commissioning assistant, but with exten-
ded scope and without query sequence. This may only be used by experts.
4 .2 .4 Air control
"Air volume setting" - The volume flow rate values can be changed and set while
the unit is running to adjust the unit to the application.
4 .2 .5 Selected functions
"Advanced overview" - Overview page with additional system information (cf.
Home 2).
4 .2 .6 Temperature (experts)
"Advanced temperature settings" - The temperature value is not set in this
mode, but rather additional expert settings, e.g. offset values.
4 .2 .7 Manual/Automatic operation (Manual/Auto)
"Test mode" - Individual functions, such as a fan or damper, can be manually
controlled in this mode.
The menus in Home 3 are described in the Installation and Operating
Instructions for the AIR1 ventilation unit . Observe these instructions for
necessary settings .
4 .3
Access rights
The following functions are password-protected:
•
Ventilation mode (back to timer function) (Operator or Admin password
required)
•
Temperature setting (Operator or Admin password required)
•
Timer (Operator or Admin password required)
•
Date/Time (Operator or Admin password required)
•
Alarms
– Screen 1 (confirmation function) (Operator or Admin password required)
– Screen 2 (Admin password required)
– Screen 3 (Admin password required)
•
Expert menus (Admin password required)
Enter the code for the corresponding access level to log in. The pre-configured
passwords are:
•
Operator: 3333
•
Admin: 1111
The access level will be kept for 5 minutes after logging in.
9
EN