Timer - Helios AIR1-BE TOUCH Installation And Operating Instructions Manual

Operating instructions
Controller - AIR1-BE TOUCH
matically returns to TIMER-based operation after the time shown in the field.

4 .0 .3 Timer

Programme each we-
ekday by pressing:
MON / TUES / WED
/ THU / FRI / SAT /
SUN / HOLIDAYS
Home 1
HOLIDAY CALENDAR: The holiday calendar has a higher priority than the nor-
mal timer. The unit will run according to the settings for the holiday in each
calendar interval programmed in the holiday calendar. All holidays have the
same settings.
Programme timer
ä
Click on the start
and stop buttons to
programme the inter-
val. Up to 4 intervals
can be programmed
per stage for each
weekday
Timer overview
Timer
Note: Recirculation & sensor-controlled operation (VOD) may not be available
depending on the unit configuration. If the unit is operated in constant air pres-
sure mode, not all ventilation stages will be available. The available ventilation
stages are described in chapter 4.0.2.
Programme holiday calendar
Timer
5
EN
Holiday calendar:
Define holidays
throughout the year
Copy: Copy the
settings from one
weekday to another
ò
Switch between
the weekday to be
programmed
ù
Switch between
the ventilation stage
to be programmed
ò
Click on the
month in which the
holidays are to be
programmed