Ei503-F2 - Electro Industries EM-WE1025H Installation Manual

Observe heater
air flow label
Notes:
1. Blower width range is 8" to 10". If larger
than 10", must use side "V" deflectors.
2. If the plenum/duct is wider than blower
opening, must use side "V" deflector, call
factory for assistance.
3. If smaller than 10", plenum can
center over blower outlet. Cannot
be larger than 10"
4. Max depth is 10". DO NOT use
this insertion method unless
element rack completely fills
plenum.
IMPORTANT NOTE: When mounting Duct Heater
within four (4) feet of blower and plenum is larger
than blower opening, you MUST follow this drawing
in detail!
INTERNAL COMPONENTS
REQUIRE MOUNTING
UPRIGHT
UAI937
BLOWER
2
4
1
8-10"
10"
MAX.
ELECTRO INDUSTRIES, INC.
MONTICELLO, MN 55362
DRAWN SOURCE DOCUMENT
MEF 4384
CHECKED VIEW/DRAWING TYPE
-
DECAL LAYOUT
APPROVED DRAWING STATUS DOCUMENT DATE
-
RELEASED
Element rack
3
DESCRIPTION
DUCT HEATER
MECHANICAL INSTALLATION - FRONT
SCALE PART/ASSY/MODEL NUMBER
1:1 -
SHEET DOCUMENT NUMBER
1/1
07-24-02

EI503-F2