Electro Industries, Inc., cannot be held responsible for field modifications, incorrect installation, and conditions which may bypass or compromise the built-in safety features and controls.
Electrical Hookup 240-volt source – from the model number and nameplate determine KW size and amp draw. According to local codes, building type, wiring length, etc. use appropriate wiring conductor size and source circuit breaker. Connect to the terminal block. Grounding –...
Operational Tips Outlet Temperature Setting The inside circuit board contains two screwdriver switches marked Ø through 7. Adjust them to select the desired set point for your application. EX: Ideal set point = 86° Mode Dial would be set to #4 Warm Air Dial would be set to #0 NOTE: MODE DIAL setting # 7 is not applicable to this product Mode Dial Temperature Range Options...
Page 8
Limited Product Warranty Effective November 1, 2009 Electro Industries, Inc. warrants to the original owner, at the original installation site, for a period of two (2) years from date of original purchase, that the product and product parts manufactured by Electro Industries, Inc.
The decision whether to repair or, in the alternative, replace products or product parts shall be made by Electro Industries, Inc. or its authorized representative.