Installing Your New Appliance - Hisense BCD-203WYA/HC4 User's Operation Manual

Installing your new appliance

Before using the appliance for the first
time, you should be informed of the
following tips.
Warning!
For proper installation, this refrigerator
must be placed on a level surface of
hard material that is the same height as
the rest of the flooring. This surface
should be strong enough to support a
fully loaded refrigerator.
The rollers, which are not castors,
should be only used for forward or
backward movement. Moving the
refrigerator sideways may damage
your floor and the rollers.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy, it is necessary to
maintain good ventilation around the
appliance for the dissipation of heat.For
this reason,sufficient clear space should
be available around the refrigerator.
Suggest: It is advisable for there to be
50-70mm of space from the back to the
wall,at least 100mm from its top,at
least 100mm from its side to the wall
and a clear space in front to allow the
doors to open 135°. As shown in
following diagrams.
550mm
100mm
Note:
This appliance performs well within
●
the climate class
the table below. It may not work
properly if being left at a temperature
above or below the indicated range for
a long period.
Climate class
SN
N
ST
T
100mm
°
135
937mm
showed in
SN,N,ST,T
Ambient temperature
+10℃ to +32℃
+16℃ to +32℃
+16℃ to +38℃
+16℃ to +43℃
8