Grinding Tips - Weston BUTCHER Series MG08 Manual

PLEASE NOTE: This Grinder features an all-hardened steel gear
transmission. This causes the Grinder to operate at a higher volume and
temperature than other Grinders. This is normal and will not affect the
Grinder's performance.

GRINDING TIPS

•
DO NOT overtighten the Front Ring Nut. It should be firmly tight.
•
Make sure the Grinding Knife blades lay flat on the Grinder Plate.
•
DO NOT operate the Grinder without meat in the Head. Running the Grinder while
dry could damage the Head and Auger.
•
ALWAYS lubricate the Head, Grinding Plate, and Grinding Knife with a food-grade
silicone spray after cleaning.
If the Grinder Plate becomes jammed/clogged during operation, follow these steps
to restore normal output:
•
Turn the Grinder "OFF" ( ) and disconnect the Power Cord from the electrical outlet.
•
Remove the Front Ring Nut and Grinding Plate.
•
Thoroughly clean the Grinding Plate. Make sure all of the holes are clear.
CAUTION
w
with care.
•
Reinstall the Grinding Plate and Front Ring Nut.
•
Reconnect the Grinder to the electrical outlet.
•
Continue with grinding.
•
Repeat as necessary.
8
840303701 v15.indd 8
Cut Hazard. The grinding knife and plate can be sharp. Handle
2/21/20 10:26 AM