Reset To Factory Default; About Axis - Axis 211A Review Manual

PRODUCT REVIEW GUIDE

4 Reset to factory default

If you for any reason lose contact with the camera, you can perform a factory default
reset. This will reset all parameters, including the IP address, to the factory default
settings:
1. Disconnect power from the camera.
2. Press and hold the Control button (on the underside of the camera) and reconnect
power.
3. Keep the button pressed until the Status indicator displays yellow (this may take up
to 15 seconds), then release the button.
4. When the Status indicator displays green (which can take up to 1 minute) the
camera is reset to the factory default settings.
5. Reinstall the network camera using the method described in chapter 3.

5 About Axis

Axis increases the value of network solutions. The company is an innovative market
leader in network video and print servers. Axis' products and solutions are focused
on applications such as security surveillance, remote monitoring and document
management. The products are based on in-house developed chip technology, which is
also sold to third parties.
Axis was founded in 1984 and is listed on the Stockholmsbörsen (XSSE:AXIS). Axis
operates globally with offices in 16 countries and in cooperation with distributors,
system integrators and OEM partners in 70 countries. Markets outside Sweden account
for more than 95% of sales. Information about Axis can be found at www.axis.com.
Axis Communications
AXIS 211A Network Camera
10
Last updated: May 1, 2005