Attach Monocolumn to Base
CAUTION: Remove any protective covering / tape from the monocolumn and console support weldment prior
to attaching to base! Failure to remove the protective covering can cause improper grounding!
NOTE: Route console cables through moncolumn.
Secure Left Monocolumn Shroud to Monocolumn
Attach Right Monocolumn Shroud to Left Monocolumn Shroud
Secure the clips on the right monocolumn shroud into position on the left monocolumn shroud.
Item
1
2
Reuse the previously removed
Item
1
2
M4.2 X 19 Phillips Pan Head Screw
3
NOTE: Push gasket down to shrouds.
Item
1
Monocolumn Shroud, Right
2
Gasket (attached to monocolumn)
Page 21 of 30
Description
Monocolumn
M8 Hex Lock Nut
M8 Hex Lock Nuts
34 Nm (25.1 ft. lbs.)
Description
Monocolumn Shroud, Left
Grommet
1.5 Nm (1.1 ft. lbs.)
Description
Qty.
1
4
Qty.
1
2
2
Qty.
1
1