Steps
1. Align and place the WWAN main antenna module in the slot on the system.
2. Replace the four (M1.6x3) screws that secure the WWAN main antenna module to the palm-rest assembly.
Next steps
1. Install the
system board
2. Install the
I/O daughter
3. Install the battery.
4. Install the
display
assembly.
5. Install the
heat
sink.
6. Install the
WWAN
card.
7. Install the
base
cover.
8. Install the
SIM card
tray.
9. Install the
SD
card.
10. Follow the procedure in
Palm-rest assembly
Removing the palm-rest assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
SIM card
4. Remove the
base
cover.
5. Remove the
solid-state drive
6. Remove the
WWAN
card.
7. Remove the
heat
sink.
8. Remove the
display
assembly.
9. Remove the battery.
.
board.
After working on your
computer.
before working inside your
tray.
computer.
Removing and installing components
55